Sensors / Transmitters
View our Range of Temperature, Humidity and Co2 Sensor Transmitters with various outputs for Building Management Systems (BMS)
-
J Type Temperature Probe 3m
R354.20EVCO EVTPJ830V200 J Type Thermocouple, 3m Steel Braded Lead, 6 x 100mm Stainless Steel tip. Range 0 to 350 Deg C
Suitable for most J Type Controllers.
-
Indoor Temperature Sensor
R201.25The Trend TB/TS Wall Mounted Space Temperature Sensor has a thermister output. The Temperature Range is -10 ...... 40 deg C
-
Indoor Temperature Transmitter
R517.50The Trend T/PS Wall Mounted Space Temperature Transmitter Sensor has an 4-20mA output. The Temperature Range is -10 ...... 40 deg C
-
J Type Temperature Probe 1.5m
R285.20EVCO EVTPJ815V200 J Type Thermocouple, 1.5m Steel Braded Lead, 6 x 100mm Stainless Steel tip. Range 0 to 350 Deg C
Suitable for most J Type Controllers.
-
NTC Temperature Probe 1.5m
R72.45EVCO EVTPN615F200 NTC Temperature Probe, thermoplastic lead, 6 x 15mm overmoulded tip. Range -40 to 110 Deg C
Suitable for all EVCO NTC Controllers.
-
Indoor Temperature Sensor
R186.30The Vector SRA-Tn10 Indoor Wall Mounted Temperature Sensor with a NTC Probe (10k ohm @ 25 Deg C) Temperature Range is -70 ...... 150 deg C
Available in different sensor options, please see Spec Sheet for ordering codes
-
Outdoor Humidity Transmitter
R1,205.20The Vector SOC-H1-A3-1 is an Outdoor Wall mounted Humidity Transmitter with an option of 0-10V / 4 = 20mA Output Configurable via jumpers.
This transmitter needs to be connected to a controller with a 0-10V input to control humidity as listed in Controllers - Analogue Inputs in the Category menu.
-
Duct/Immersion Temperature Sensor
R356.04The Vector SDB-Tn10-12-W-1 is a Duct Mounted Temperature Sensor which can also be used as an Immersion Sensor by fitting an AMI Stainess Steel Pocket (Available in different lengths)
Please see Spec Sheet for specific ordering codes
-
-
Outdoor Temperature Transmitter
R1,055.70The Vector SOC-T1-1 is an Outdoor Wall mounted Temperature Transmitter with an option of 0-10V / 4 = 20mA Output Configurable via jumpers.
-
Indoor Humidity Transmitter
R1,083.62The Vector SRC-H1-A3 Indoor Wall Mounted Humidity Transmitter has an option of 0-10V / 0-20mA / 4 -20mA Output Configurable by jumpers
-
Indoor Humidity Transmitter and Temp Sensor NTC
R1,138.50The Vector SRC-H1Tn10-A3 Indoor Wall Mounted Humidity Transmitter with Temperature Sensor has options of 0-10V / 2-10V / 0 - 20mA / 4 -20mA output for humidity configurable by jumpers and a NTC Temperature Probe.
